![Happy Nuts THE BALLBER PRO User Manual Download Page 4](http://html1.mh-extra.com/html/happy-nuts/the-ballber-pro/the-ballber-pro_user-manual_3789601004.webp)
CLEANING
TRAVEL LOCK
IMPORTANT
SAFETY INSTRUCTIONS
Step 1
☞
Use the cleaning brush to remove hair
from the blade.
Step 2
☞
Rinse the blade under running water
and wipe with a soft cloth.
Step 3
☞
Store in a dry place.
CAUTION
:
Always ensure trimmer is turned off and unplugged
before cleaning. Clean after each use.
For assistance, email us at
for additional support.
The Ballber™ Pro is designed in California and assembled in China.
Distributed by Suit Up Brands LLC, Playa Del Rey, CA 90293.
© 2022 Suit Up Brands LLC. All rights reserved. Happy Nuts and The Ballber are
trademarks of Suit Up Brands LLC, registered in the U.S.
Travel lock prevents the trimmer from
accidentally powering on.
For household use only. When using an electric product, always follow basic safety precautions.
Read all instructions before using The Ballber™ Pro. Save these instructions for future reference.
Warning
To reduce the risk of burns, fire, electric shock, or injury to persons
• Use this product only for its intended household use as described in this manual.
• This trimmer is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the trimmer by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the trimmer.
• The trimmer is intended to cut hair, and is capable of cutting skin if not used carefully. Do not use
attachments not specified by the manufacturer.
• This trimmer is for personal use only. Do not use it on animals.
• Always attach the power cord to the trimmer first, then to power outlet.
• Never use the trimmer if it has a damaged power cord or damaged power adapter, if it is not
working properly, if it has been damaged, or after the charging cord has been dropped into
water. Contact customer service at [email protected] to determine if the product is under
warranty.
• Keep the appliance away from direct sunlight and heated surfaces. Do not store at temperatures
above 140°F (60°C). Do not place anything heavy on or pinch the appliance.
• To prevent possible damage to the power cord, do not wrap it around the product.
• Keep the air openings free of lint, hair and similar objects.
• Never drop or insert any object into any opening.
• Do not operate or plug in trimmer where aerosol (spray) products are being used or where
oxygen is being administered.
• Always check the blade and trimming guard before using the trimmer. Do not use the trimmer if
the blade or guard are damaged, as injury may occur.
• Always store the trimmer, attachments and power cord in a moisture-free area. Make sure the
cord is disconnected from the trimmer.
• To recharge the battery, only use the supply unit provided with the trimmer.
DANGER
To reduce the risk of electric shock
• If connected to a power outlet, do not reach for the appliance that has fallen into water. Unplug
immediately before retrieving appliance.
• Do not place or store the appliance where it can fall or be pulled into a tub or sink. Do not place
or drop into water or other liquid.
• Do not use while fully submerged in water.
• Always unplug the appliance from the electrical outlet immediately after charging. Unplug this
appliance before cleaning.
BATTERY
This appliance contains batteries that are non-replaceable & materials that are hazardous
to the environment. Battery must be be disposed of separately from household waste.
• Unplug and operate the trimmer until the battery runs out.
• Remove the screw at the base of the backside of the trimmer.
• Remove the battery and PCB (Protection Circuit Board) for disposal.
• Dispose of the battery safely according to your local environmental laws and guidelines.
To activate travel lock, press and hold the on/
off button for three seconds. The red travel lock
symbol appears on the digital display when
activated.
To deactivate the travel lock, press and hold the on/
off button for three seconds. The green travel lock
symbol appears on the digital display when travel
lock is deactivated.
Summary of Contents for THE BALLBER PRO
Page 1: ...USER GUIDE...