L
E
o
Page 5
Please note.
The holes in the slat support rail
should be facing upwards.
D
the nuts(K) and bolts(J). Tighten using the open ended spanner(H)
- Locate the centre rail(D) into the headboard and footboard brackets,and secure using
secure using the bolt and washer(P).
- First attach the centre rail support leg(O) into the underneath of the centre rail(D), and
Step
5
K x 2
P x 1
Fittings
J x 2
D
K
J
P
Step
- Push fit two plastic caps onto either end of the slat. Push fit the slat into the pre-drilled pilot
holes. Please note that it may require a light tap with a soft hammer to secure the plastic
end caps into the holes. Repeat this step with the other 3
slats.
The assembly is now complete.
1/ 33
6
Fittings
L x 64
135cm bedstead
150/180cm bedstead
L x 68
