MANUAL (QUICK GUIDE) - 2
FILTER MAINTANENCE
Unplug the power supply before taking out the filter and place it depending on the air quality. It is
recommended to take out the filter after 1 to 2 months, clean the dust and other pollutants absorbed by
the filter with a blower (cold air) or vacuum cleaner, and place the filter under sun about 2 hours, so as to
maintain the best purifier effect of the filter.
FILTER REPLACEMENT
Due to the different use environment, the filter service life would be different. When the purification
efficiency is reduced, please replace the filter as soon as possible to ensure the purification energy
efficiency of the purifier. Remove plastic bag before placing filter in the device. It is recommended to
contact us or your local licensors to replace it. Do not discard the discarded filter everywhere.
WIPING THE DEVICE
To stubborn besmirch or dust, you can use a soft cloth that has soaked with warm water to wipe. Do
not use volatile liquid and detergent, benzene, paint thinner, polishing powder, detergent and other
substances may cause damage to the device.
SAFETY PRECAUTIONS & WARNINGS
Do not place the device directly below a shelf
or other objects that might hinder the exiting
air flow.
Do not insert or drop any foreign objects or
liquids into the device. If either happens,
immediately unplug the device.
Be sure to stop the device and pull out the power
plug when moving.
Do not over-pinch, bend or twist the AC power
cord, or the core may be exposed or broken.
Do not run cord under carpeting. Do not cover
cord with throw rugs, runners, or similar
coverings. Do not route cord under furniture or
appliances. Arrange cord away from traffic area
and where it will not be tripped over.
This appliance has a polarized plug. To reduce
the risk of electric shock, this plug is intended to
fit in a polarized outlet only one way. If the plug
does not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
To avoid injury, keep fingers away of pre-filter
opening when pushing down the outer tube and
from the center opening of the lid when pressing
down.
Never cover vents while the device is running;
do not place objects on top. Avoid dropping the
device.
“WARNING: To Reduce The Risk Of Fire Or
Electric Shock, Do Not Use This Fan With Any
Solid-State Speed Control Device”
The device cannot be started if the filter cover is
not installed correctly.
Stop using the device immediately in case
abnormal sound, odor, high temperature,
irregular rotation of the fan. Do not sit, lean or
lean on the device.
Do not operate any fan with a damaged cord
or plug. Discard fan or return to an authorized
service facility for examination and/or repair.
WARNING
WARNING —
Skin or eye damage may result from directly viewing the light produced by the lamp in
this apparatus. Always disconnect power before relamping or servicing. Replace Lamp With Lamp Model
No. H3535AQ33E0Z03, Manufactured by Shenzhen Hangbright Optoelectronic Co. ltd.