Hapi Ozy User Manual Download Page 18

Page: 18 / 26

3.Safety instructions

3).Only suitable if the approved vehicles are ﬁtted with3 point safety-belts, approved to UN/ECE

constitutes an integral part of the car seat performance.

(1).This product can be used for children with body weighing in 0-13kg (Group 0+ ). It uses 3-
point seat belt or ISOFIX and top tether rearward mounted in the car, use 5 point harness
system to ﬁx the child. It is forbidden to carry more than one child or overload. Make sure all the
belts are not twisted.

manufacturer.
(8).If the product surface cloth is not textile, put away from sunlight, otherwise the surface will

(2).This product can be used for children with body weighing in 9-18kg (Group I). It uses 3-point
seat belt forward install in the car, use 5 point harness system to ﬁx the child. It is forbidden to
carry more than one child or overload. Make sure all the belts are not twisted.
(3).This product can be used for children with body weighing in 15-36kg (Group I II).

(4).For an ISOFIX child car seat, the instruction for use shall be given to read the car

and a danger of not following closely the installation instructions provided by the child restraint

burn children's skin.
(9) This product is not designed for domestic use and can only be used in cars. For safety
reasons, even if the child is not in the seat, this product should only be installed in the car. It is

Regulation No. 16 or other equivalent standards.

Move 5 point harness system, use 3 point seat forward install in the car. Or use isoﬁx and 3
point seat forward install in the car. Or use isoﬁx and 3 point seat belt forward install in the car. It
is forbidden to carry more than one child or overload. Make sure all the belts are not twisted.

forbidden to leave children alone in their car seat unnattended.

(7).The product should be changed when it has been subject to violent stresses in an accident.

(5).Any straps holding the car seat to the vehicle should be tihght , that any straps restraining

(10).Any luggage or other objects liable to cause injuries in the event of a collision shall be
properly secured. Make sure that they do not cause harm to children in the event of a vehicle

Any alterations or additions to the device without the approval of the Type Approval Authority,

the child should be adjusted to the child's body , and that straps should not be twisted.

(11).The child car seat shall not be used without the cover. And the seat cover should not be

manufacturer's handbook.

For the safety of your child, please read the following instructions carefully. Carelessness or
mishandling can lead to many injuries.

(6).Ensure that any lap strap is worn low down, so that the pelvisis is ﬁrmly engaged.

replaced with any other than the one recommended by the manufacturer, because the cover

collision.

12).The instructions of this product can be kept in the reserved place of the child seat during the
life span of the product.
(13).Warning: the installation path of the seat belt can not use any other force point except the
mark. If there is any doubt, please contact the safety manufacturer.

16 or other equivalent standards. Not suitable for models with only 2-point seat belts.

4. Usage method

Note: it is recommended that the ISOFIX chuck of the seat be locked on the ISOFIX connector
of the car when installing the child seat. Can improve seat safety and comfort.

This car seat is available with a three-point seat belt that passes throughor UN/ECE Regulation

4.1 The mounting position of the seat in a vehicle