6
Using The X-60
2. Close the lid and
securely
tighten the swinging “C” clamps
in a criss-cross pattern, as you would tightening lug nuts on
a tire. Be sure to tighten the bolt in the black hinged arm
(circled in red).
4.
Slowly
open the ball valve by turning it parallel with air hose
until desired air pressure is reached.
70-80 PSI is recommended.
1. Place molds and parts on the shelf making sure they are level.
3.Attach the air hose to the unit while in the “shut” position”.
5. When the desired pressure is reached, close the ball valve
and remove the air hose.
For heating instructions please see page 10.
