6
Safety & Maintenance
Unit will become warm to the touch
and possibly hot when in use.
Unit MUST be securely mounted to a bench, heavy duty cart, or
other sturdy surface before using. The
3/8”
fastening holes in base
units can be used to secure unit.
No flammable materials(i.e. solvents) should be placed near or inside
the X
-
20 unit.
The location of the X
-
20 unit should provide enough clearance for the
swinging lid to open.
A suitable 15 AMP, 115 VAC circuit should be within
5’
of the X
-
20
unit.
Note: This device uses 440 WATTS at 120 VAC @ 60 HZ. Users in a foreign country
are responsible for procuring the proper converter that meet the standards and require-
ments for use.
A sufficient clean, dry air supply should be available to pressurize the
unit.
Use
“
DANGER DO NOT OPEN
”
tag on each machine while they
are under pressure.
Clean debris from top of shelf and underneath on a daily basis.
Check fittings and valves for pressure leaks on a weekly basis.
Grease the tips and threads of 6 clamping bolts and check cover align-
ment on a monthly basis.(See Pg. 12)
