In the air mouse mode(postive side), we can press the key “IR” to learn the ir code.
Of course, only read, green, yellow, blue, and power key can save the learned ir code.
For the details of learning. Pls refer to the following steps.
1. Press the “IR” key and the red led starts flashing to indicate that it has entered the
infrared learning status. If there is no any operation, it will exit the learning status in 6
seconds.(press the “IR” key one more time also exit the IR learning status)
2. Close the infrared emitting diode of IR remote control to the top of this product
within 5cm.
IR Learning
within 5cm.
3. Press and hold the IR key that needs to be learned. If the study is successful, the red
light will keep bright. Otherwise, please repeat step 3.
4. Press one of the colorful keys(except “IR” key), the learned infrared code will be
stored into this key.
5.Please repeat the step 3 if you need to learn more.
6. Press the “IR” key to exit the IR learning status.
Notes: 1.Press the and at the same time and hold them for over 3 seconds
to erase all stored infrared code.
2.
Only part of infrared codes can be learned.
Summary of Contents for H1
Page 1: ...VER 1 3 ...
