Hanwha Vision SPA-P200W, Quick Manual

Page: 17 / 22

17
English
ACCESS THE SPEAKER
The PC should be connected to the same
network as the product when accessing the
product for the first time.
Use a network cable to connect the
product’s NETWORK port to the switching
hub that is connected with the PC.
a
Set an IP address to 192.168.1.x,
the same band as the product, in the
network property of the PC.
b
Run a web browser on the PC.
c
Enter the initial IP address of the
product (192.168.1.100) into the
address bar to connect.
J
`
An available web browser is Google Chrome
(Version 99.0.4844.82 or higher).
`
Google Chrome is available at
www.google.com/chrome.
`
For the computer OS, it can be used in Windows
10 or Mac 10.15 (Catalina) or 11 (Big Sur).
SET THE PASSWORD
When you are attempting to access the
product through the web browser for the first
time, the login password must be registered.
J
`
A password should contain 8 or more
characters, and if it contains fewer than 9
characters, then a combination of 3 or more
English uppercase/lowercase letters, numbers,
or special characters must be used. If it
includes 10 to 16 characters, a combination of
2 or more types must be used.
`
It is recommended not to use the same
character repeatedly or consecutive keyboard
inputs as passwords for enhanced security.
LOGIN
Whenever you’re accessing the product, the
login window will be displayed.
You must enter the user ID and the preset
password in order to access the product.
a
Enter “
admin
” in the <
ID
> input field.
b
Enter the preset password into the
<Password> field.
c
Click [ Login ].
J
`
If you lose the password, you must press
the
[RESET]
button on the product for about
12 seconds in order to reset the product.
When the product is reset, all the other set
values will be reset as well, so be careful not to
lose the password.
`
Do not disconnect the power until the
system initialization is complete after
pressing the [RESET] button of the product
or during product resetting. It will take up
to 10 minutes to reboot after resetting the
product.