installation & connection
18_
installation & connection
CONNECTING WITH OTHER DEVICE
Ethernet
Monitor for installation
Power
J
`
The Test Monitor Out port of the product is provided for easier installation, and is not recommended for monitoring purposes.
Power Supply
Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the
camera.
J
`
If the power sources for PoE+ and DC 12 V are simultaneously turned on, the device power will be supplied by both of PoE+
and DC 12 V.
-
You can also use a router featuring PoE+ to supply power to the camera.
-
Use PoE+ that is compliant with the IEEE 802.3at protocols.
`
Be careful not to reverse the polarity when you connect the power cable.
`
If you want to connect an external device, you must turn off the external device before proceeding.
`
Connect the set and the adapter power line first, and then connect the power cable to the outlet on the wall.
Power Cable Specification for Each Model
Model
Input power
Wire Type (AWG)
Cable Length (Max.)
PNV-A6081R-E1T/
PNV-A6081R-E2T
DC 12V
#18
14 m
#16
23 m
Network Cable Specification
Item
Contents
Remark
Connector
RJ-45(10/100/1000BASE-T)
Ethernet
10/100/1000BASE-T
Cable
Category 6
Max Distance
100 m
PoE Support
IEEE 802.3at
Summary of Contents for PNV-A6081R-E2T
Page 1: ...NETWORK CAMERA User Manual PNV A6081R E1T PNV A6081R E2T...
Page 30: ......
