36_
outdoor bullet camera
outdoor bullet camera
Installing the camera module
1.
Hang the safety cable up on a hook that looks like an arrow in the Bottom cover.
e.g.
2.
Connect the network/power/audio/alarm cables to the camera module terminal.
3.
Attach the camera body to the Bottom cover.
J
`
Make sure to firmly tighten the fastening screws so that there is no water damage issue.
x4
3x
HEX
S3
4.
Adjust the camera direction using the Hex. L wrench provided.
J
`
When you adjust the camera position using a bracket, please loosen the bracket screw, adjust the camera, and tighten it. If
you attempt to adjust it forcibly while the screw is tight, it may result in a scratch or other problems.
