Hanwha Techwin WISENET SCB-6005, User Manual

Page: 14 / 35

14_ introduction
introduction
When Using a C/CS-Mount lens (Not included)
Before installing a lens, identify whether the lens to be installed is a C-Mount or CS-Mount.
This camera is set for a CS-Mount Lens by default. To install a C-Mount Lens, a simple
modification is required.
y
When Using a CS-Mount Lens
Remove the protective glass cover at the
front of this product and turn the CS-
Mount Lens clockwise to install it.
M
`
Use the lens connector shown in the following
figure. If the dimensions of the connector are not
correct, it may damage the camera, or the lens
may not be installed firmly.
`
If the lens is too heavy, the camera becomes
unbalanced and there may be problems. Use a lens
that weighs less than 450g.
`
When adjusting the Automatic Level Control
(ALC) of an auto iris lens, use Av mode if available.
If you use the Pk mode, the picture brightness
may change continuously.
C-Mount Lens: 10mm or less
CS-Mount Lens: 5mm or less