36_ camera operation
camera operation
M
`
Holding Function Setup switch 2 seconds, simple focus would be performed.
`
The simple focus function may not work well in the following cases.
- Low illumination environment
- Changing scene during focus adjustment (sudden movement, appearance or
disappearance)
- Sudden change of brightness during focus adjustment
- Strong spot light in front of or near the subject
`
In environments where focus adjustment is difficult, use the manual focus function.
EXIT
Select a desired EXIT mode using the Function Setup switch depending on the camera
purpose.
y
SAVE :
Save the current settings and exit the MAIN SETUP menu.
y
NOT SAVE :
Do not save the current settings and exit the MAIN SETUP menu.
y
RESET :
Revert camera to factory settings. (The language, communication and lens
settings will remain the same).
M
`
To turn off the power after setting the camera menu, the OSD menu must disappear first.
