FIG.3 Output status Figure FIG.4 Lock status Figure
(4).Over-current close settings, press the SHIFT key, panel indicator led M1
～
M5 are lighted, then press the OUTPUT key ,at this point the
power supply run in the over-current close mode . When the overload OCP led is lighted and cut off the output voltage.
(5). Panel button lock, at the normal output apparatus can use the feature, which is mainly in order to avoid the load when connected to
adjust the output voltage to the harmful effects of the load, The use of panel keypad lock is on, press the keyboard key lock (LOCK) 2
second or more, digital display "-Loc", said keyboard panel has been locked, the keyboard is locked, the Operation panel is displayed
when "-Loc" prompt, all keys are not working, unlock long again by the button, you can return to normal status, see FIG.4:
Default storage can store a maximum of 5 group output parameter default value to M1 as an example by doing the Following:
(1). Storage operation, first set the preset voltage, current, specific settings can be when used with reference to the normal voltage and
current settings methods, voltage and current settings End After, After Press the second function enable key (SHIFT) on the panel, M1
～
M5LED all lighted, the show voltage and current values are to be stored, see FIG.5 and see FIG.6;
FIG.5
Storage status
FIG.6 After storage
status
(2). Press the corresponding memory key output parameters, storage time of M1, M1 pressing keys corresponding to the M1 light-emitting
diode light, see FIG.6
(3). Other in each group stored in the default method and the same M1;
6