PPS1004A
User’s Manual 12
Mode Setting
User can set voltage value continuously by PPS1004A.
1. Mode
There are two modes to set a list file. You can select 1*10 or 2*5 mode.
1*10: Set a ten-step list file;
2*5: Set two five-step list files.
2. Edit List
①
When select 2*5 mode, there are two types 1 and 2 in “Number” column.
②
If select number 2, it begins to edit number 2 list file from sixth step.
③
User can select the start and stop steps.
④
When set voltage, please select “Volt” and input the voltage rage. Then
click
key. This list will edit the step voltage value and set correctly
according to the linear mode.
⑤
To clear the setting and voltage, please click
key.
⑥
Click
key to select CH1/CH2 and set voltage.
⑦
After setting voltage, click
key. It will set a voltage value in the
list when click “Run” key every time. And the actual output voltage displays in
“VOLT_ACTUAL” column.