9.5 DUAL FUNCTION
With this function, you can simultaneously ground channel 1 and
channel 2 to get +30V and –30V outputs, proceed as follows :
1. First do not turn on power.
2. Short the output (+) terminal of channel 1 and channel 2 with a
short wire.
3. Turn on the power switch, push “serial” button down to light up the
indicator, and you can get negative output voltage of 0~30V from
channel 1 and positive output voltage of 0~30V from channel 2, as
shown in the diagram.
4. In order to limit the current for +/- supply, you can perform the
setting of CV/CC procedures to get the desired current output.
5. Do not forget to remove short wire of output terminals when
operating in other mode.
Fig7
20