Start using
CN
8
Start using
⚫
To prevent electric shock accidents, please do not short circuit the top of the
test line and the line with voltage.
⚫
Do not measure AC voltage, AC current, or DC current. Otherwise, it may
cause instrument damage or personal injury accidents.
⚫
To prevent electric shock, please confirm the rated value of the test wire
before measurement, and do not measure voltage higher than the rated
value.
8.1
Measurement Settings
Click the
[Range]
button to enter the measurement display interface.
Click the
Type
menu soft key to select categories such as V&R, Voltage, and
Resistance.
8.2
Set voltage range
1
Press the
[Range]
key to enter the measurement page
；
2
Click on the
Range (V)
menu soft key
；
3
Use the menu soft key to select the range and complete the voltage range
setting.
8.3
Setting the Resistance Range
1
Press the
[Range]
key to enter the measurement page
；
2
Click on the
Range (R)
menu soft key;
3
Use the menu soft key to select the range and complete the setting of the
resistance range.
