2
Power
Press the power key and the device starts. Press the power key again, and the device will shut
down. Before start it, please confirm that the battery has enough power.
The oscilloscope is equipped with a power adapter and the interface is Type-C. The input AC
power supply is 100~240V, 50~60Hz. The output is 5V@2A. The power adapter can be used
to supply the oscilloscope or charge the battery.
When connect the power adapter to the oscilloscope, if the battery is not installed inside the
oscilloscope, the power key backlight is red and flash; if the battery is installed inside the
oscilloscope and the battery power is not filled, the power key backlight is red; if the battery is
installed inside the oscilloscope and the battery power is full, the backlight of the source key is
extinguishes.
Total Menu
Press Menu button to enter Total Menu.
Press the up and down direction keys to move the cursor up and down.
Press the left key to enter the next menu or function page.
Press the right key to return to the previous menu.
Vehicle Diagnosis
Press the Menu key to enter the total menu, press the up and down direction keys to select the
"Vehicle diagnosis" and press the right direction keys to enter the Vehicle diagnosis menu.
Use the direction keys to select the test type, and the oscilloscope will call the corresponding
settings.
Scope
1. Trigger Status 2. Main Time Base Window
3. Trigger level 4.Battery level
5. Trigger Marker 6. Time base
7. Trigger time 8. The information of coupling and volt/div of channel
9. Channel Marker 10. Window displays waveform
POWER
USER INTERFACE
USER INTERFACE
