E. Disintegration Testing
Phase One Disintegration Tester User Guide—40-108-001 Rev. A—14 November 2016
E-10
Post-test Disassembly and Cleaning
When a test is completed, disassemble and clean up as follows:
1. Finish recording any observations and results before
disabling the test setup.
2. Disconnect baskets from arms by tilting and removing from
basket shaft holder as shown.
3. Use the red plastic drip cups supplied with the tester (or
other devices) to collect drippage while guiding the basket
assemblies away from the arms.
4. Dispose of test media in an appropriate manner
5. Rinse baskets and beakers in warm water.
6. If necessary, remove tubes from basket assemblies as
needed to be able to clean in between tubes and mesh
screens.
7. Dry the beakers and basket assemblies.
