5 - 19
Hanskamp AgroTech B.V. (the Netherlands)
www.hanskampagrotech.nl/en
PipeFeeder HighSpeed
EN
t.b.v carrousel
24VAC & 12-24VDC
2.3.1 General Safety
Read and understand the manual and all safety signs before you connect power
supplies to operate, maintain or adjust the PipeFeeder.
Only trained persons are permitted to operate the PipeFeeder. A first-aid kit must
be available near the PipeFeeder. Store in a highly visible place.
A carbon dioxide or foam fire extinguisher must be available near the PipeFeeder.
Store the fire extinguisher in a highly visible place.
Install all protective covers and guards before you operate the PipeFeeder.
Wear the correct protective clothing and equipment. Disconnect and isolate the
electrical power supply before you clean or do maintenance on the PipeFeeder,
also be sure that the compressed air supply is depressurised.
Know the emergency medical centre number for your area.
Contact your nearest milking equipment dealer provider if you have any questi-
ons.
Review safety related items with all operators frequently (annually).
The PipeFeeder HighSpeed should be shielded, so that te dosing system is un-
reachable. This separation should meet European standards and guidelines. Wit-
hout this separation the PipeFeeder HighSpeed dooesn’t meet the safety require-
ments of Hanskamp AgroTech. If the PipeFeeder doesn’t meet the safety require-
ments, there can not be derrived any rights.
2.3.2 Electrical Safety
Only an authorized electrician must install the electrical power supply for the
PipeFeeder.
Make sure the electrical grounding of the electrical system and all parts of the
PipeFeeder meet the local rules and regulations.
Replace any damaged electrical lines, conduits, switches and components imme-
diately.
Isolate the electrical power supply before you open the lid of the PipeFeeder to
work on the electrical system.
2.3.3 Installation Safety
Read and understand the instructions in this manual.
Make sure the PipeFeeder is correctly installed.
