5
-
20
Hanskamp AgroTech B.V. (The Netherlands)
www.hanskamp.nl/en
MultiDos HighSpeed
EN
Doseersysteem
-
Dosing system –
Dosiersystem –
Systeme de dosage
2.3.1 General Safety
•
Read and understand the manual and all safety signs before you connect
power supplies to operate or adjust the MultiDos HighSpeed.
•
Only trained persons are permitted to operate the MultiDos HighSpeed.
A first
-
aid kit must be available near the MultiDos HighSpeed. Store in a
highly visible place.
•
Install all protective covers and guards before you operate the MultiDos
HighSpeed.
•
Wear the correct protective clothing and equipment.
•
Disconnect and isolate the electrical power supply before you clean or do
maintenance on the MultiDos HighSpeed.
•
Know the emergency medical centre number for your area.
•
Contact your nearest milking equipment dealer provider if you have any
questions.
•
Review safety related items with all operators frequently (annually).
2.3.2 Electrical Safety
•
Only an authorized electrician must install the electrical power supply for
the MultiDos HighSpeed.
•
Make sure the electrical grounding of the electrical system and all parts of
the MultiDos HighSpeed meet the local rules and regulations.
•
Replace any damaged electrical lines, conduits, switches and components
immediately.
•
Isolate the electrical power supply before you open the MultiDos High-
Speed to work on the electrical system.
2.3.3 Installation Safety
•
Read and understand the instructions in this manual.
•
Make sure the MultiDos HighSpeed is correctly installed.
2.3.4 Operating Safety
•
Read and understand the applicable manual and all safety signs before you
connect power supplies to operate or adjust the MultiDos HighSpeed.
•
Only trained persons are permitted to operate the MultiDos HighSpeed.
•
Switch off the electrical power supply by taking plug out of the power point
and secure the plug before you clean or do maintenance on the MultiDos
HighSpeed.
•
Install the covers and guards before you operate the MultiDos HighSpeed.
•
Keep hands, feet, hair and clothing away from all the electrical parts.
•
Keep unauthorized persons, especially small children away from the
MultiDos HighSpeed at all times.
•
Before the electrical supply is attached to the MultiDos HighSpeed, make
sure all parts are tight and that all the parts are in good condition.
•
Contact your nearest milking equipment dealer if you have any questions.
