ESL Access Point HS_C09851 PRODUCT MANUAL
Page 14 , Total 15
Figure 5-2 ESL Access Point shortcut design interface
The configuration page contains:
（
1
）
Network configuration: Access Point network settings, like DHCP switched IP
address, subnet mask, etc.
（
2
）
ESL-working configuration: set the ESL-working system IP address and port.
（
3
）
Restart Access Point: reset Access Point software.
（
4
）
Change password
：
change the login password.
（
5
）
Restore factory settings
：
reset all the Access Point settings.
（
6
）
Upgrade system: upgrade the software of Access Point system and RFID sub-
systems.
6 HOW TO USE
（
1
）
Please plug in the power source and network wire.
（
2
）
The system is working when the Access Point is powered by either 12V DC or
POW adaptor and green light is on.
（
3
）
The starting up time is approximately 40 seconds. All the LEDs will light up once
when complete starting up.
（
4
）
Please first configure the Access Point IP and ESL-working system IP as
described hereinbefore.
（
5
）
The red Nixie light will keep displaying 1 and try to make connection to the ESL-
working system at a regular time unless it is successfully connected
（
6
）
When connected to the ESL-working system, the two digits Nixie light will display
the Access Point ID. The Access Point is now capable of communication operation
like receiving heart-beat, data communication, ESL query, etc.
7 PACKING LIST
7.1 Packing diagram
