Hanshow ESL Controller HS_C09978 Product Manual
21 Hanshow Copyright Reserved ©
Hanshow Technology Co., Ltd.
5
Workflow
To ensure that Wi-Fi AP works normally before HS_C09978 powered-on. Specifically,
the workflow of USB integration AP is as shown in
Circuit check
Integration AP powered -on
Wi-Fi AP runs normally
Association
parameter settings
HS_C09978 powered-on
Integration AP running
HS_C09978
configuration
HS_C09978 running
Figure 5-1 Wi-Fi AP workflow
Follow the steps:
1.
Before starting HS_C09978, check if the USB interface of Wi-Fi AP meets
5V/500mA and USB 2.0 and higher, and the system is whether to support USB
virtual network port.
2.
Check if power cable and network cable are connected properly.
3.
HS_C09978 device does not start until the Wi-Fi AP is officially started (about 5min).
4.
HS_C09978 startup takes about 1min. After the system startup is complete, the LED
indicators turn green that indicates working status.
5.
