Hanshow Shelf Edge Digital Signage HS-AT3511 Product Manual
13 Hanshow Copyright Reserved ©
Zhejiang Hanshow Technology Co., Ltd.
Configuration item
Description
IP address
IP address, can be configured when IP setting is set to static.
Gateway
Gateway address, can be configured when DHCP is selected for IP
settings.
Network prefix length
The bit length of the network prefix, usually 24, can be configured
when DHCP is selected for IP settings.
DNS
Domain name servers, including DNS1 and DNS2. DNS1 is the
primary DNS server. Only when DNS1 cannot find IP addresses
corresponding to domain names or when DNS1 is unavailable, can
DNS2 configuration take effect. This configuration item can be
configured when DHCP is selected for IP settings.
After the configuration is complete, tap the
Save
button. The system automatically
connects to the wireless network according to the configurations. If the connection is
successful, the screen displays “Connected”, as shown in
Figure 4-5 Wireless network connected successfully
4.1.2
Ethernet settings
Follow the steps below to configure Ethernet connection:
1.
Tap
Ethernet
to open the Ethernet settings page.
2.
On the upper-right corner of the page, tap the switch to turn on the Ethernet
connection function. Ethernet settings also support DHCP and static IP settings, as
shown in
Figure 4-6 Ethernet settings
