Smart Thermal Detector
User Manual V1.5
Smart Thermal Detector User Manual V1.1
Copyright © 2020 Hanshin International Limited
All Rights Reserved
Page 7 / 19
Users should avoid measuring temperature in the cases below, wait for 20 minutes before
measuring the temperature.
Situation
Effect
After intense exercise
Measure result will be high
After hot bath
Measure result will be high
After long time exposure to directly sunlight
Measure result will be high
Wearing too many clothes / not enough clothes
Measure result will be high/low
Thermal Detector Setting
Connect USB Mouse to the Smart Thermal Detector for detail settings of the software.
Consult your IT Administrator before the setting
Click the setting icon by moving the mouse
cursor with your connected mouse.
The
configuration
page
will
be
shown
immediately.
Basic Setting
1.
Capture photo when body temperature
detected exceed 37.3
˚C
/ 99.1
˚F
By enabling this function, a photo will be
captured when abnormal body temperature is
detected (e.g. Yellow and Red)
2.
Capture photo when body temperature
detected successfully
By enabling this function, a photo will be
captured after the detection no matter what
the result is
3.
Enable smart camera detection
By enabling this function, smart camera can
detect human faces
4.
Enable fast detection
1 second fast detection is enabling
5.
Enable body temperature measurement after
tagged NFC card
By enabling this function, the measurement
will only start after users tap their NFC card