Hanshin Machinery GRH 3 series, User Manual

Page: 48 / 79

48 / Hanshin
5. Operations
2. Operation Data Setup
Operation data setup items
AR01: [ ]
AR02: Operation diff. pressure
AR03: Operation pressure
AR04: [ ]
AR05: Auto start diff. pressure
1)
AR06: [ ]
T01: Y-D switchover time
T02: auto stop time
T03: [ ]
T04: [ ]
T05: [ ]
HW01: input schedule operation time
OT2 : air filter replacement time[ ]
OT3 : oil filter replacement time[ ]
OT4 : separator replacement time[ ]
Every data will be automatically changed for the optimal
operation when changing the operation pressure, so no other
data but operation pressure does not need changing.
Items with[ ] and some other items are password-protected to
prevent any change without permission.
Every operation data are changed in [PARAMETER].
By using [ ] button, place the cursor on an item to change
and then, change the data by pressing [ENT] button. After
then, press [ENT] button to complete the input and press
[ESC] button. If IO screen is displayed, press [
] button to
move to the main screen.
* For the details, refer to page 49.
1)
Auto restart diff. pressure when the compressor automatically stops
by no-load operation.
Auto restart pressure calculation
[AR03] - [AR05] = Auto restart pressure
7.0 - 1.0 = 6.0 bar
Main screen
Press [ ]button on
the main screen.
Press [ENT] button.
Using [ ] buttons,
Place the cursor on the
parameter and press
[ENT] button.
IO screen
Parameter screen