Page EN-32
Troubleshooting table
The dishwashing results are not satisfactory
Problem
Possible cause
Solution
There are residues or
streaks on the dishes.
The rinse aid is incorrectly
dosed.
Adjust the dispensed dose (see
„Adding rinse aid“ on page EN-11).
There is no dishwasher salt.
Add dishwasher salt (see „Adding
dishwasher salt“ on page EN-12).
The dishwasher salt is
clumpy.
Stir the dishwasher salt using the
end of a spoon or similar.
The dishes are not com-
pletely clean.
There are food scraps which
are encrusted onto the dish-
es.
Soak dirty dishes prior to washing
the dishes.
The dishes have not been
stacked optimally.
Stack the dishes in such a way that
all parts can be reached by the wa-
ter jets (see „Loading the dishwash-
er“ on page EN-13).
You have selected the incor-
rect dishwashing programme.
Select the correct dishwashing
programme (see „Dishwasher pro-
gramme table“ on page EN-16).
The dishwasher detergent is
incorrectly dosed.
Use the correct dosage of dish-
washer detergent (see „Dishwasher
programme table“ on page EN-16).
The water pressure is too low. Turn the water tap on completely.
The spraying arm can not ro-
tate unhindered.
Ensure that no dishes are impeding
the motion of the spraying arm.
The nozzles on the spraying
arm are blocked/calcified.
Clean the nozzles (see „Cleaning
the spraying arm“ on page EN-22).
Summary of Contents for WQP8-T7736E
Page 78: ......