Page EN-30
Troubleshooting table
Problem
Possible cause
Solution
The dishes are not com-
pletely clean.
There are food scraps which
are encrusted onto the dish-
es.
Soak dirty dishes prior to washing
the dishes.
The dishes have not been
stacked optimally.
Stack the dishes in such a way that
all parts can be reached by the wa-
ter jets (see „Loading the dishwash-
er“ on page EN-13).
You have selected the incor-
rect dishwashing programme.
Select the correct dishwashing
programme (see „Dishwasher pro-
gramme table“ on page EN-16).
The dishwasher detergent is
incorrectly dosed.
Use the correct dosage of dish-
washer detergent (see „Dishwasher
programme table“ on page EN-16).
The water pressure is too low. Turn the water tap on completely.
The spraying arm can not ro-
tate unhindered.
Ensure that no dishes are impeding
the motion of the spraying arm.
The nozzles on the spraying
arm are blocked/calcified.
Clean the nozzles (see „Cleaning
the spraying arm“ on page EN-22).
Error indicators
Code
Solution
E1
: It takes too long for
the water to fill up.
Turn the water tap on completely.
Arrange the inlet hose properly so that it is not kinked (see „Con-
necting the inlet hose“ on page EN-24).
Ensure that the water pressure is correct. See „Technical specifi-
cations“ on page EN-32.
E3
: The heating element
is defective.
Have the appliance checked and repaired.
E4
: Water overflow
Switch off the tap. Find the gap in the seal (or have someone find
it) and repair the leak (or have it repaired).
E8
: Internal fault
Have the appliance checked and repaired.
ED
: Internal fault
Have the appliance checked and repaired.
Summary of Contents for WQP8-T7636E
Page 70: ......
