Page EN-11
Dishwasher detergents, rinse aids and dishwasher salts
1. Pull back the catch (25) on the detergent
dispenser (21).
The cover will pop open.
(26)
(27)
2. The large compartment (26) is the main
wash compartment; the small one (27) is
the pre-wash compartment.
3. Add dishwasher detergent.
a) For wash programmes with a pre-wash
cycle, put
– ⅔ into the main wash compartment
(26) and
– ⅓ into the pre-wash compartment
(27).
b) For wash programmes without a pre-
wash cycle, put the whole amount into
the main wash compartment (26).
4. Push the dispenser cover closed so that
the catch (25) clicks into place once
again.
Adding rinse aid
NOTICE
Risk of damage!
Using an excessive amount of rinse aid
can lead to increased foaming and can
compromise the rinsing results.
■
Wipe away rinse aid which has over-
fl owed immediately.
■
Take note of the markings for the
maximum fi ll quantities (“max”) in
the rinse aid chamber.
Using unsuitable substances can cause
damage to the dishwasher.
■
Only put rinse aids which are suita-
ble for dishwashers into the rinse aid
chamber.
(9)
Add rinse aid before using for the first time
and when the “Add rinse aid” display (9) is
illuminated.
As rinse aid is automatically dispensed during
operation, it ensures that the dishes are spot-
free and accelerates the drying process.
(20)
1. Turn the cover of the dishwasher salt
compartment (20) a quarter turn in an an-
ti-clockwise direction and remove it.
2. Fill the water tank to the “max” mark in
the opening. The adjacent display window
will then turn black.
3. Wipe away any rinse aid which has spilt
immediately so that you don’t compro-
mise the rinsing results and to avoid in-
creased foaming.
4. We would recommend that you do not
change the dosage that was set by the
factory initially. Only correct the dosage if
you are not satisfied with the rinsing re-
sults (see below).
5. Replace the cover on the opening of the
compartment and turn it in a clockwise
direction.
