Page EN-26
Installation, connection and commissioning
Connection for power supply
WARNING!
Risk of electric shock!
Faulty electrical installation or excessive
mains voltage may result in an electric
shock.
■
Prior to connecting the dishwasher,
ensure that you have page EN-6 tak-
en note of all the safety instructions
and adhered to them.
Fire hazard!
■
Do not use multi-socket extension ca-
bles, multi-socket plugs, travel adapt-
ers or similar.
– The electrical connection of the dishwasher
requires a professionally installed earthed
power socket with its own fuse of a suffi-
cient size (220–240 V~, 50 Hz / 10 A).
– We recommend using a pulse-sensitive re-
sidual current device (RCD).
Test run
It is recommended that you carry out a test
run before the first dishwasher cycle in order
to remove residues from the manufacturing
process and in order to ensure that the device
functions perfectly.
Carry out this test run when the dishwasher is
empty and without any dishwasher detergent.
See chapter „Dishwasher operation“ on page
EN-19 for the procedure.
If no water escapes during the test run and if
there are no unusual noises, the appliance is
ready to use.
