Operating modes
Page EN-22
Starting the cooking process
NOTICE
Risk of damage to property!
Improper handling of the appliance
may cause it to become damaged.
■
The appliance must never be operat-
ed without the glass rotary plate or
food inside.
■
Do
not
use the grill rack in microwave
mode. Doing so can lead to sparks.
1. Place the dish or drink into the cooking
compartment and close the door so that it
clicks into place and locks.
2. Press the ‘Mikrowelle’ sensor (31) once.
The power level
P100
flashes in the dis-
play.
– If you want to select a different power lev-
el, press the ‘microwave’ sensor (31) again
or turn the control dial (3) until the desired
power level is displayed (23).
For the two highest power levels
p100
and
P80
, the symbol for high-power
operation
is also shown next to the mi-
crowave symbol
in the display.
3. Press the ‘START / +30Sek. / Bestätigen’
sensor (27) to confirm the power level.
The indicator in the display stops flashing.
4. Turn the control dial (3) to set the desired
cooking duration.
You can select the cooking time in the fol-
lowing steps:
Area
Steps
up to 1 min
5 seconds
1-5 min
10 seconds
5–10 min
30 seconds
10-30 min
1 minute
30-95 min
5 minutes
5. Press the ‘START / +30Sek. / Bestätigen’
sensor (27).
The appliance starts. The ventilator starts.
The light in the cooking chamber switches
on. The glass rotary plate starts to turn. On
the display, the symbols will flash and the
time display will begin to count down. As
soon as the cooking time has finished, a
signal will sound 5 times and the appliance
switches off. The display now shows the
time again.
6. Press the ‘Auto’ sensor (28) to open the
door. Carefully remove the dish from the
cooking compartment.
• Press the ‘START / +30Sek. / Bestätigen’
sensor (27) to extend the cooking time
during operation by 30 seconds.
The cooking duration can be increased in
this way in 30 second increments up to 95
minutes.
• To see the actual time during cooking,
press the ‘Timer / Uhrzeit’ sensor (29)
during operation. The time is displayed for
approx. 3 seconds, after which the cook-
ing time reappears on the display.
• To see the active power level during cook-
ing, press the ‘Mikrowelle’ sensor (31)
during operation. The power level of the
current cooking process is displayed for
