Care and maintenance
Page GB-18
(16)
(17)
6. Place a grease filter (16) with the pins
into the openings.
7. Push the lock (17) down; snap the
grease filter (16) shut and release the
lock again.
8. Repeat the last two steps for the second
grease filter.
9. Switch the power back on.
10. Dispose of the used charcoal filters with
household waste.
Changing the lighting
CAUTION
Risk of injury!
■
If one of the LEDs ceases to work, it
must be changed by an authorised
service technician.
Note for the service technician:
This exhaust hood requires LEDs with
the ILCOS D-Code
DBR-2/65-H-64, 220-240 V~, 2 W.
