Page GB-31
Troubleshooting table
The display shows an error code
Problem Possible causes
Solutions, tips
E30
Door is not closed properly .
Close door properly .
If the problem persists, please contact our Ser-
vice Centre (see GB-33) .
E10
Problems with the water inlet .
The water pressure may be too
low, or the water valve is closed .
If necessary, open the valve completely .
Check filters in the inlet hose and clean, if neces-
sary .
If the problem persists, please contact our Ser-
vice Centre (see page GB-33) .
E21
Pump defective, lint trap
clogged or kink in the outlet
hose .
Cleaning the lint trap .
Check outlet hose and correct position .
If the problem persists, please contact our Ser-
vice Centre (see page GB-33) .
E12
Too much water in the appli-
ance .
Switch the washing machine off and on again .
If the problem persists, please contact our Ser-
vice Centre (see page GB-33) .
E
xx
Other faults
Please contact our Service Centre (see page
GB-33) .
