Page EN-17
Available settings
Available settings
Setting the start time
This feature allows you to set the start time
of the drying process. You can delay the start
time by up to 24 hours.
1. Load the dryer and close the door.
2. Press the On/Off button (1).
The display will light up.
3. Select your desired cycle and adjust any
additional settings as required.
4. Press the button for delay start (16).
You can increase the length of delay by re-
peatedly pressing the button.
5. Press the Start/Pause button (2) to begin
the cycle.
The symbol for delay start will flash.
The drying cycle will begin as soon as the
delay start timer runs out.
6. If you want to pause the delay start, press
the Start/Pause button.
7. If you want to cancel the delay start, press
the On/Off button (1).
Setting the drying time
Additional drying time can be set for the cy-
cles Warm, Cool and Airing.
• To increase the drying time for the three
cycles, press the button for the drying du-
ration (15).
• You can increase the drying duration in
steps of 10 minutes by repeatedly press-
ing the button.
Setting the drying intensity
This setting allows you to further adjust the
drying intensity according to your laundry
items.
The drying intensity cannot be set for every
cycle. On the display (4), the symbol for dry-
ing intensity will indicate which cycle is being
supported by this setting.
For this setting, the drying time increases in
steps of 5 minutes. The drying intensity must
be set before starting a cycle.
1. Select your desired cycle.
2. To set the drying intensity, press the but-
ton for drying intensity (14) repeatedly
until you arrive at your desired drying in-
tensity.
(11)
Zeit sparen
(12)
(13)
(16)
(15)
(14)