Page EN-13
Set-up, connection and initial start-up
Installation
NOTICE
Risk of damage to property!
Selecting the wrong screws can dam-
age the worktop.
■
Use the screws which are supplied in
the delivery or screws of an appropri-
ate length.
• Only install the dishwasher underneath a
continuous worktop which is joined to the
units adjacent to the dishwasher.
• Maintain sufficient distance from the walls
and adjacent appliances. The measure-
ments of the recess must at least corre-
spond to the details in the diagram above.
Preparing the appliance
1. Switch the fuse off.
2. Remove cardboard, polystyrene and ad-
hesive strips from the inside, if you have
not already done so.
(34)
3. Affix the enclosed condensation-protec-
tive film (34) to the bottom of the work sur-
face. In this way, you will avoid damage
to the worktop as a result of hot steam
which may be emitted from the interior if
the appliance door is left open.
90°
600 mm
820–870 mm
100 mm
580 mm
80 mm
90°
Inlet/outlet area
and electrical con-
nection.
Recess
dimensions