Page EN-38
Troubleshooting table
The dishwashing results are not satisfactory
Problem
Possible cause
Solution
There are residues
or streaks on the
dishes.
The rinse aid is incorrectly
dosed.
Adjust the dispensed dose (see
„Changing the rinse aid dose“ on
page EN-15).
The dishwasher salt is
depleted.
Add dishwasher salt (see „Adding
dishwasher salt“ on page EN-16).
The dishwasher salt is
clumpy.
Stir the dishwasher salt using the end
of a spoon or similar.
The dishes are not
completely clean.
There are food scraps which
are encrusted onto the dish-
es.
Soak dirty dishes prior to washing the
dishes.
The dishes have not been
stacked optimally.
Stack the dishes in such a way that
all parts can be reached by the water
jets (see „Loading the dishwasher“ on
page EN-17).
You have selected the in-
correct dishwashing pro-
gramme.
Select the correct dishwashing pro-
gramme (see „Programme table“ on
page EN-21).
The dishwasher detergent is
incorrectly dosed.
Use the correct dosage of dishwasher
detergent (see „Programme table“ on
page EN-21).
The water pressure is too
low.
Turn the water tap on completely.
The spraying arm can not
rotate unhindered.
Ensure that no dishes are impeding
the motion of the spraying arm.
The nozzles on the spraying
arm are blocked/calcified.
Clean the nozzles (see „Checking
and cleaning the spraying arms“ on
page EN-27).
