Page EN-25
Additional options
Additional options
Adding dishes
CAUTION!
Risk of scalding!
If you open the dishwasher door, hot
steam will come out.
■
Maintain a sufficient distance from
the door and do not hold your head
or upper body directly above the
open door.
■
Keep children and pets away from the
appliance when opening the door.
■
Make sure that children do not open
the door during operation.
You can add more dishes even if the pro-
gramme is already running.
The current programme should only have
been running for a short time, otherwise the
additional dishes will not be cleaned.
1. Touch the sensor (9) to pause the
wash programme.
The two dots in the remaining time indica-
tor (14) are permanently illuminated.
2. Open the dishwasher door slightly and
wait until the spraying arm has come to a
standstill and the steam has dispersed.
3. Slowly open the door all the way.
4. Add the dishes.
5. Close the door.
6. Touch the sensor (9) again to restart
the programme.
A signal tone will sound at regular
intervals while the programme run is
paused.
Changing the programme
CAUTION!
Risk of scalding!
If you open the dishwasher door, hot
steam will come out.
■
Maintain a sufficient distance from
the door and do not hold your head
or upper body directly above the
open door.
■
Keep children and pets away from the
appliance when opening the door.
■
Make sure that children do not open
the door during operation.
You can interrupt an active programme at any
point and start a new programme. However,
do not forget to add extra dishwasher deter-
gent if the programme has already been run-
ning for a long period and the cover of the
dishwasher detergent dispenser is already
open.
1. Touch the sensor (9) to pause the
wash programme.
The two dots in the remaining time indica-
tor (14) are permanently illuminated.
2. Touch the
P
sensor for 3 seconds.
The programme ends. The display (5)
shows -:--.
3. Select the new programme and any addi-
tional options as described on the follow-
ing pages.
4. Touch the sensor (9)
The newly selected programme starts after
10 seconds.