cessive ice formation increases pow-
er consumption, the drawers become
diffi cult to open and the door may
not close completely.
Risk of damage
NOTICE
Risk of damage to property!
If the cooling unit has been transport-
ed horizontally, lubricant from the com-
pressor may get into the cooling circuit.
■
If possible, only transport the appli-
ance in a vertical position.
■
Allow the cooling unit to stand up-
right for two hours before starting up
the appliance. The lubricant will fl ow
back into the compressor during this
time.
Improper handling of the appliance
can lead to damage to property.
■
Do not pull or lift the appliance by its
doors or door handles.
■
Place the appliance only on a lev-
el and fi rm surface that can support
the weight of the appliance when it
is fi lled.
■
Do not use sharp or pointed objects
to unpack it.
■
When unpacking the appliance, nev-
er damage the insulation material on
the back of the appliance.
■
The interior lighting must only be
used to illuminate the interior of the
appliance. It is not suitable for light-
ing a room.
■
When cleaning, please note:
–
Never use harsh, granular, soda,
acid, solvent-based or abrasive
cleaners. These attack the plastic
surfaces. All-purpose cleaners with
a neutral pH are recommended.
–
Door seals and plastic parts are
sensitive to oil and grease. Remove
contaminants as quickly as possi-
ble.
–
Use only soft cloths for cleaning.
■
Wait 5 minutes after switching off.
Only then switch the appliance on
again.
Safety
Page EN-9