Hanseatic HGS14355EW, User Manual

Page: 39 / 50

HGS14355EW, HGS14355ES HGS14355EW, HGS14355ES
Changing the door hinges
EN-13
Changing the door hinges
EN-13
9. Tip the freezer backwards (maximum 45°) so that you can
also move the lower door hinge.
10. Unscrew both front levelling feet.
11. Unscrew the lower hinge plate. To do this, use an 8 mm
spanner or a cross-head screwdriver.
12. Move the hinge pin to the opposite side of the hinge plate. To
loosen and tighten the nut, use a 10 mm spanner or the un-
derside of a screw foot.
13. Screw the hinge plate tightly back onto the opposite side.
Make sure that the hinge pin is in the hinge bushing of the
door. The door will now function properly again.
7. Place the cover back on the freezer. Push down on both
sides (left and right) of the front of the cover until you hear
it click into place. Reattach the temperature controller to its
designated holder.
MED
MAX MIN
8. Screw the two screws tightly back onto the cover. To do this,
use a cross-head screwdriver. Reattach both screw covers.
14. Screw both adjusting feet securely back onto the freezer.
15. Carefully stand the freezer upright.
16. Reinsert the blind plug on the opposite side of the door.
You have successfully changed the door hinges.