Page EN-32
Set-up, connection and initial start-up
Inlet/outlet area
and electrical
connection.
Recess dimensions
90°
450 mm
820 mm
100 mm
580 mm
80 mm
90°
Requirements:
– Only install the dishwasher underneath a
continuous worktop which is joined to the
units adjacent to the dishwasher.
– Maintain sufficient distance from the walls
and adjacent appliances. The recess di-
mensions must at least correspond to
the details in the diagram above, ‘recess
dimensions’.
1. Remove cardboard, polystyrene and ad-
hesive strips from the inside of the dish-
washer, if you have not already done so.
2. Loosen both screws on the reverse side
of the covering panel and remove them.
