Operation
Page GB-9
Requirements for safe use
– You have read chapter „For your safey“ on
page GB-5 and understand all the safety
notices.
– The refrigerator is installed and connected
as described in chapter „Start-up“ on page
GB-15.
Starting up the refrigerator
NOTICE
Risk of damage to property!
If the refrigerator has been carried on
its side, lubricant from the compressor
may have got into the refrigeration
circuit.
■
If possible, do not tilt the refrigerator
into a horizontal position.
■
Allow the refrigerator to stand upright
for 2 hours before starting it up. This
gives the lubricant time to flow back
into the compressor.
• Switch off the fuse for the mains socket
to which the refrigerator is connected. A
signal tone will sound, and the refrigerator
light (6) will illuminate when the door is
opened.
Operation
Switching the refrigerator on
and off
The refrigerator is factory-set to switch
on automatically when you first insert
the mains plug into the socket.
Switching on
Adjust
Mode
Super
Smart
1
4
2
3
5
(1)
( )
• Press and hold the Adjust button (1) for 5
seconds. A signal tone will sound and the
refrigerator light (6) will illuminate. The re-
frigerator is switched on.
If the refrigerator makes disturbing
noises after it is switched on, check
that it is in a stable position and cor-
rectly installed.
Switching off
Adjust
Mode
Super
Smart
1
4
2
3
5
(1)
( )
1. Press and hold the Adjust button (1) for 5
seconds. A signal tone will sound and the
refrigerator light (6) will go out. The refrig-
erator is switched off.
2. Empty the refrigerator and clean it as
described in chapter „Care and mainte-
nance“ on page GB-13.
