Start-up
Page EN-27
Attaching the door handles
Please now attach the door handles to the
fridge and freezer doors as desired.
(21)
1. Loosen the screws (21) situated on the
sides of the doors using a Phillips screw-
driver.
(22)
(23)
(25)
(24)
2. Affix the larger handle (21) to the fridge
door (22) using the screws (23), and at-
tach the smaller handle (24) to the freezer
door (25).
Cleaning before use
In order to remove the odour which is pres-
ent in all new appliances, wipe the fridge and
freezer compartment out prior to first use
with a solution made from 100 ml vinegar
and 200 ml water. Then wipe it out with clean
water and dry all of the parts off afterwards.
Electrical connections
WARNING
Risk of electric shock!
Touching live parts may result in severe
injury or death.
■
Do not operate or continue to oper-
ate the appliance, if it
–
shows visible signs of damage, e.g.
the power cord is defective,
–
starts smoking or there is a smell of
burning,
–
makes unfamiliar noises.
In such cases, remove the mains plug
from the socket or unscrew/isolate
the fuse and contact our service de-
partment (see page EN-35).
■
Do not connect to a timer or a sepa-
rate remote-controlled system for dis-
tance monitoring and control.
■
If the mains plug is no longer acces-
sible after installation, an all-pole dis-
connecting device complying with
overvoltage category III must be
connected to the house wiring with a
contact gap of at least 3 mm; this in-
cludes fuses, circuit breakers and con-
tactors.
■
Do not kink or pinch the mains cable
or lay it over sharp edges. This can re-
sult in a break in the cable.
