
Page EN-17
Dishwasher operation
Preparation
Requirements:
– You have read chapter „Safety“ on page
EN-6 and understand all the safety notices.
– The appliance is set up and connected as
described in chapter „Installation, connec-
tion and initial commissioning“ on page
EN-22.
– Dishwasher detergent, rinse aid and dish-
washer salt and multitabs are added.
1. Open the tap completely.
2. Leave the dishwasher door open.
3. To switch on the dishwasher, press the
button (1).
You will hear a signal tone and the display
and all LEDs will light up briefly.
Selecting the dishwasher
programme
It is recommended that you carry out
a test run before the fi rst dishwasher
cycle in order to remove residues from
the manufacturing process and in order to
ensure that the device functions perfectly.
Carry out this test run when the dishwasher
is empty and without any dishwasher deter-
gent.
1. Select the suitable dishwashing pro-
gramme based on the “dishwasher pro-
gramme table”, see page EN-16.
2. Press the
P
(5) button until the display (4)
on the left shows the duration, and the
display on the right shows the number of
the desired programme (for example, the
Eco programme P4:
3:15 4
).
3. If you
– want your dishes to be extra-dry, select
the “Extra-dry” option (see below)
– want to delay the programme start, see
“Delay start” below.
– want to start the programme, contin-
ue with „Starting the dishwashing pro-
gramme“ on page EN-18.
Extra drying
This option produces an improved drying re-
sult. It is not available for programmes
,
and .
• To enable the option
– press the button
before
the programme starts (7).
The LED (8) will light up.
– To disable the option, press the button
again. The LED will turn off.
Delayed start
The washing cycle usually be-
gins immediately after the dishwash-
er door has been closed.
If you want the cycle to begin later, you can
specify this. The start time can be delayed
between 1 and 24 hours.
• Press the button (6) until the display
(4) shows the desired delay duration
(
H:00
,
H:01
to
h:24
).
Dishwasher operation
(4)
(5)
(6) (7)
(8)
Summary of Contents for 710 594
Page 15: ...Seite DE 15 Geschirrspüler beladen ...
Page 50: ...Page EN 14 Loading the dishwasher ...
Page 70: ......