Commissioning and operation Page EN-17
Heating milk
The appliance is suitable for heat-
ing milk for babies up to 40 °C.
You should sterilise the kettle be-
fore using it for this purpose.
1. Fill the kettle up to the MAX
mark (1,7 L) with water and
bring it to a boil.
2. Then pour out the water and
let the kettle cool down.
3. Pour enough milk into the ket-
tle so that the top of the milk
is between the MIN and MAX
marks.
4. Set the temperature to 40 °C
with the button (4).
5. Press the start/stop button (5)
to heat the milk.
6. Always check the temperature
before giving the milk or baby
food to babies.
7. Wash the kettle out thoroughly
immediately after pouring out
the milk.
Overheat protection
If the appliance is accidentally
switched on without water or with
too little water, a built-in safety fea-
ture will switch the appliance off.
After a cool-down period of ap-
prox. 10 minutes, the appliance
will be ready for operation again.
