Page EN-33
Set-up, connection, installation and initial start-up
Test run
It is recommended that you carry out a test
run before the first dishwasher cycle in or-
der to remove residues from the manufactur-
ing process and in order to ensure that the
device functions perfectly. Carry out this test
run when the dishwasher is empty and with-
out any dishwasher detergent.
1. Open the tap completely.
2. Close the dishwasher door.
3. Press the button (1) to switch on the
dishwasher.
You will hear a signal tone and all LEDs will
illuminate briefly.
After a moment, the
ECO
programme LED
will light up.
4. Press the
P
button (12) repeatedly until
the LED to the right of the
programme
symbol lights up.
5. Start the programme with the button
(13).
The programme begins after a few seconds.
6. Ensure that no water is coming out and
no unusual sounds can be heard.
7. When the programme is finished,
an acoustic signal will sound.
Switch the dishwasher off using the
button (1).
8. Slightly open the door to allow the moist
air to escape.
9. Close the tap.
If no water has escaped and no unusual nois-
es have been heard, the dishwasher is ready
for operation and you can now load it with
dishes.