5. Lever out the white dummy plugs (27)
and the grey dummy plugs (28) with a
knife, and replace them on the opposite
side.
6. Remove the protective cap (29) with the a
knife, loosen the screw (30) underneath it,
and lever out the blind plug (31) with the
knife.
7. Replace the screw (30) with protective
cap (29) and the dummy plug (31) on the
opposite side.
Preparing the doors for
conversion
(32)
(34)
(33)
1. Using a cross-headed screwdriver, loos-
en the screws (32) of the hinge insert
reinforcement (33) and remove the hinge
insert reinforcement (33) as well as the
hinge insert (34).
(32)
(33)
(34)
2. Insert the hinge insert (34) on the oppo-
site side, and tighten it and the hinge in-
sert reinforcement (33) again with the two
screws (32).
3. Swap the dummy plug and the insert for
the hinge pin (35).
(35)
4. Take out the hinge pin (35) and replace it
on the opposite side.
(3)
(36)
(37)
5. Using a cross-headed screwdriver, loosen
the two screws (36) on the bottom of the
freezer door (3), and remove the hinge
upper part (37).
Changing the door hinges
Page GB-21
Summary of Contents for 4912 1660
Page 72: ......
