Setting up appliances in tandem
Page EN-25
(23)
(25)
(27)
3. Place one of the connecting pieces (25) on
the appliance roofs so that the holes in the
connecting piece (25) lie above the holes
in the appliance roofs.
4. Put on the upper cover (23) and use
4 screws (27) to attach the upper cov-
er (23) and the connecting piece (25).
(29)
5. Attach the seal profile (29).
(31)
6. Use a string or a small screwdriver to re-
move the blind plugs (31) on the front of
the appliances.
(27)
7. Then connect the appliances at the front
using the other connecting piece (25) and
two of the screws (27).
8. Attach the cover panel (26) for the connect-
ing piece (25).
(28)
(24)
9. Then connect both appliances at the rear
using the connecting piece (24) and the
screws (28).
