The door hinges are on the right upon delivery.
As changing the door hinges requires some
manual skills, please read through the steps
of the procedure beforehand. To change the
door hinges, you will need the following tools:
– Cross-head screwdriver
– 8 and 10 mm open-end wrench or socket
wrench
1. Pull out the blind plug from the top of the
door.
2. Loosen both screw covers on the top of
the cover using a flat-head screwdriver.
3. Unscrew the two screws (on the left and
right) from the top of the cover. To do this,
use a cross-head screwdriver.
4. Lever out the two sides of the cover on
the front slightly and lift the cover up. In
doing so, ensure you do not damage the
temperature controller.
5. Unscrew the three fixing screws for the
hinge plate and the two screws on the
opposite side. To do this, use an 8 mm
spanner or a cross-head screwdriver.
Remove the hinge plate.
6. Screw the hinge plate as well as the two
screws back onto the respective opposite
side.
Changing the door hinges
Changing the door hinges
Page EN-22
Summary of Contents for 34291655
Page 30: ...Umweltschutz Seite DE 30 ...
Page 60: ......
