Operation
Page EN-15
Operation
Before getting started
• Read chapter “Safety” on page EN-4 and
all the safety notices.
• Install the exhaust hood as described in
chapter “Assembly” on page EN-12.
(17)
(18)
(19)
(20)
(21)
Switching on the appliance
• To switch the appliance on, touch the
sensor (21).
– A beep will sound.
– The sensors (21), (20) and (17)
will light up.
(7)
(8)
– The exhaust hood’s cover (7) will open.
– The lighting (8) will go off.
– The appliance will start running at fan
level 1.
Changing the fan setting
The fan has three settings
(17) slow,
(18) medium and
(19) fast.
The appliance will start running at fan level 1.
• To set the desired fan level, press the cor-
responding sensor.
The sensor will light up. The fan level will
change.
Switching off appliance
• To switch the appliance off, touch the
sensor (21) again.
– The sensors (21), (20) and (17)
will go out.
– The fan will stop running.
– The lighting (8) will go off.
– The exhaust hood’s cover (7) will close.
Light
WARNING
Risk of injury!
■
Should one of the LEDs stop working,
it must be changed by an authorised
service technician.
Note for the service technician:
This
exhaust hood requires LEDs with the
ILCOS D code DSS-1.5/65-S-120/33.
Your exhaust hood is equipped with two LED
lights (8). They will turn on automatically
when you switch on the appliance. However,
you can switch them off as required.
• To switch the lighting on or off, press the
button (20).
Summary of Contents for 28602856
Page 52: ......
