Hanseatic 22160219, User Manual

Page: 38 / 50

HKS14355FW, HKS14355FS
Setting up the refrigerator
EN-12
5. Unscrew the three fixing screws for the hinge plate and the
two screws on the opposite side. To do this, use an 8 mm
spanner or a cross-head screwdriver.
Remove the hinge plate.
6. Screw the hinge plate as well as the two screws back onto
the respective opposite side.
7. Place the cover back on the refrigerator. Push down on both
sides (left and right) of the front of the cover until you hear it
click into place.
8. Screw the two screws tightly back onto the cover. To do this,
use a cross-head screwdriver. Secure the two screw covers.
9. Tilt the refrigerator backwards (maximum 45°) to allow you to
adjust the lower door hinge also.
10. Unscrew both front levelling feet.
11. Unscrew the lower hinge plate. To do this, use an 8mm span-
ner or a cross-headed screwdriver.
12. Move the hinge pin to the opposite side of the hinge plate.
To loosen and tighten the nut, use a 10 mm spanner or the
underside of a screw foot.
13. Screw the hinge plate tightly back onto the opposite side.
Make sure that the hinge pin is in the hinge bushing of the
door.
The door will now function properly again.
14. Firmly screw both levelling feet back onto the refrigerator.
1.
2.
15. Carefully stand the refrigerator upright.
16. Reinsert the blind plug on the opposite side of the door
You have successfully changed the door hinges.