Hanseatic 18978337, User Manual

Page: 66 / 88

Page EN-22 Operation: Additional functions
Setting the start time pre-selection
The start time delay can be set in one-hour
increments. The maximum start time pre-se-
lection is 23 hours.
1. Select the desired cycle using the cycle
selector (2).
2. Press the button “Start time pre-selec-
tion” (6).
“01h” and the symbol are shown on the
display panel (9), i. e. the selected cycle
will start in one hour.
3. Press the “Start time preselection” but-
ton (6) repeatedly until the desired delay
time is set.
4. Press the button (3).
The cycle will start after the delay setting
has elapsed.
Terminate delay
If you have
• already pressed the button (3): press
the “Start time pre-selection” button (6).
The cycle starts immediately.
• not yet pressed button (3): press the
“Start time pre-selection” button (6) re-
peatedly until the symbol disappears
from the display panel (9).
Drying duration/Drying level
If you would like to dry your laundry once the
selected cycle has finished, you can select a
– drying duration or
– drying level.
The setting influences the cycle time.
Drying duration
(5) (9)
It is recommended to adjust the drying dura-
tion to the amount of laundry.
Amount of
laundry
Drying duration
up to 1.0 kg 30 minutes
1.0 to 2.0 kg 60 minutes
2.0 to 3.0 kg 90 minutes
3.0 to 3.5 kg 120 minutes
more than 3.5 kg
Recommendation: Using
the additional function
“Drying level”
Depending on the cycle you have selected, a
drying duration is already pre-programmed.
1. Tap the “Drying duration” button (5).
The symbol will appear in the “Drying
duration” section (5).
The display panel (9) first shows the drying
duration “30” and the new cycle time short-
ly afterwards.
2. If you wish to set a longer drying dura-
tion (60, 90 or 120 min), keep repeating
Step 1 until the display panel (9) shows
the desired drying duration.
If one of the four durations is not displayed,
then it is not available for the selected cycle.
You can now select further additional
functions or start the cycle.